**BHEL Technical Question Papers 2016 Technical Placement Paper.**

** **BHEL Technical Solution Job 2016 Placement question paper with answers BHEL Technical 2016 question with solution you can download it in FREE, if BHEL Technical 2016 test paper in text or pdf for BHEL Technical 2016 Answer Keys you can download BHEL Technical for MBA/ B.Tech / M.Tech 2016 page also just Go to menu bar, Click on File->then Save.

BHEL Technical Solution Campus 2016 exam recruitment question paper Free Download PDF is available in www.oldquestionpapers.net which has been provided by many students BHEL Technical Placement paper for 2016 paper is available for all the students in FREE and also BHEL Technical Placement question paper for B.Tech MCA 2016 fully solved BHEL Technical 2016 with answer keys and solution.

**BHEL Technical Question Papers 2016 Technical Placement Paper**

**BHEL Technical Question Papers 2016 Technical Placement Paper**

You can get daily updates on BHEL Technical Solution Campus 2016 from www.oldquestionpapers.net here you can also check similar links for other related study materials on BHEL Technical Here BHEL Technical Placement question bank 2016.

BHEL PAPER – BHEL Technical Placement Paper 2014

BHEL paper consists of two parts.

A) Technical

B) Aptitude

Both parts consists 120 marks each. There is negative marking which 0.2.

Technical paper

1) How many links in slider crank mechanism?

2) Deflection of cantilever beam subjected to end point load?

3) Stress concentration factor Kf =?

4) What is the unit of BHN?

5) What is efficiency of riveted joint?

6) Composition of Munz metal?

7) One shaft is subjected to torque 1700 N-m having shear strength of 40Mpa. Determine the diameter?

8) A reversible engine is working between the 600F and 60F. Carnot efficiency is equal to = 9) Coefficient of restitution lies between =

10) Pectlet number is equal to = a)Re*Nu b)Re*Pr c)Re*Gr

11) Formula of effectiveness of heat transfer =

12) Emissivity depends on 13) Reynolds number formula

14) Production process for Al? 1

5) Thick metals welded by following processes…

18) Cutting forces decreases by = a) increasing rake angle b) decreasing rake angle c) increasing relief rake angle

19) Some problem on Mohr’s circle radius…

20) Volumetric strain =

21) Pendulum problem Time is given length = ?

23) Which is not related to CI engine = ans) spark plug

24) Cotter joint generally fail by 25) Which coupling is used for intersecting shafts?

26) No of teeth on gear and pinion is given, center distance is given, module = ?

27) Coefficient of friction and angle is given, what is ration of tension in belt?

28) What is lamis theorem?

29) Condition for self locking ……

30) Discontinuous chips can be produced by….

31) For critical speed should be a)>v2 b) >v3

32) Air at 20C blows over a hot plate 50 by 75 cm maintained at 250C. The convective heat transfer coefficient is 25W/m2. Cal the heat transfer.

33) Metacenter always lies ….

34) Rotometer is used to measure….

35) Formula for effort of a governor…

36) Stroboscope is used to measure…..

37) What is size of A4 paper?

38) Some problem on riveted joint….

39) Modulus of rigidity G is given by…

40) Wave properties in solids is depends on elasticity.

41) Radiation heat transfer is directly proportional to….

42) Escape velocity is given by v2gR 43) Kinetic energy formula….

44) Corolis component…. 45) Potent ional Energy theory is given by….

46) Perpendicular axis thoerm…

47) Pappus thoerm….

48) Center of gravity of a spherical shell..

49) Angle and linear dimension is given by chamfer.

50) For thick cylinders…..

51) N = 10 to N = 10E5 cycles then it is …. a) finite life b)infinite life

52) Value of steel young’s modulus …

53) Endurance strength of steel equal to …

54) Three problems on strain gauges ….

55) Three problems on vectors some related to work done….

56) Straight line mechanism…

57) Some problem springs..

58) Design on thermal stresses can be considered for a) concrete b)steel rolls c)blast furnace

59) Velocity problem it is in the vector form to find displacement?

60) Hardness is a property.

**Similar Pages…**

**Similar Links…… **