**PGCET Civil Engineering Question Paper 2016.**

**PGCET (Postgraduate Common Entrance Test)** 2016 Postgraduate Programme Civil Engineering question paper with answers PGCET 2016 Question with solution you can download it in FREE, if PGCET Civil Engineering 2016 paper in text or pdf for **PGCET **2016 Answer Keys you can download Postgraduate Common Entrance Test 2016 page also just Go to menu bar, Click on File->then Save.

**PGCET Postgraduate Common Entrance Test** 2016 M-Tech Postgraduate Civil Engineering Entrance Question paper Free Download PDF is available in **www.oldquestionpapers.net** which has been provided by many students this **PGCET **2016 paper is available for all the students in FREE and also PGCET PG Entrance question paper 2016 fully solved PGCET with answer keys and solution.

You can get daily updates on PGCET Civil Engineering from **www.oldquestionpapers.net** here you can also check similar links for other related study materials on PGCET Here **PGCET Postgraduate Common Entrance Test** Civil Engineering question bank 2016 is also available in English Language.

*PGCET Civil Engineering Question Paper 2016*

*PGCET Civil Engineering Question Paper 2016*

## PGCET 2016 CIVIL ENGINEERING

#### Quiz-summary

0 of 75 questions completed

Questions:

- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75

#### Information

Lets starts

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading...

You must sign in or sign up to start the quiz.

You have to finish following quiz, to start this quiz:

#### Results

0 of 75 questions answered correctly

Your time:

Time has elapsed

Average score | |

Your score |

#### Categories

- Not categorized 0%

- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75

- Answered
- Review

- Question 1 of 75
##### 1. Question

1 points**The principle of super position is applicable when**CorrectIncorrect - Question 2 of 75
##### 2. Question

1 points**Chemically, marble is known as**CorrectIncorrect - Question 3 of 75
##### 3. Question

1 pointsCorrectIncorrect - Question 4 of 75
##### 4. Question

1 points**The portion of the brick cut across the width is called as**CorrectIncorrect - Question 5 of 75
##### 5. Question

1 points**If the Young’s modulus of a material is twice the modulus of rigidity, the Poisson’s ratio of the material is**CorrectIncorrect - Question 6 of 75
##### 6. Question

1 points**Rate of change of shear force is equal to**CorrectIncorrect - Question 7 of 75
##### 7. Question

1 points**When a first class brick is immersed in cold water for 24 hours, it should not absorb water by weight more than**CorrectIncorrect - Question 8 of 75
##### 8. Question

1 points**Maximum grade of concrete recommended for RCC by IS 456-2000 for moderate exposure is**CorrectIncorrect - Question 9 of 75
##### 9. Question

1 points**Size of the fine aggregate should not exceed _________ mm.**CorrectIncorrect - Question 10 of 75
##### 10. Question

1 points**Wall constructed with stores to protect the slopes of cutting in natural ground from the action of weathering agents is called**CorrectIncorrect - Question 11 of 75
##### 11. Question

1 points**The wedge shaped bricks forming an arch ring are called**CorrectIncorrect - Question 12 of 75
##### 12. Question

1 points**The first reading taken on a bench mark with leveling staff inverted is entered in the field book as**CorrectIncorrect - Question 13 of 75
##### 13. Question

1 points**If the staff is not held vertically at a leveling station, the reduced level calculated from the observation would be**CorrectIncorrect - Question 14 of 75
##### 14. Question

1 pointsCorrectIncorrect - Question 15 of 75
##### 15. Question

1 points**Closed contours with higher value inwards represents**CorrectIncorrect - Question 16 of 75
##### 16. Question

1 pointsCorrectIncorrect - Question 17 of 75
##### 17. Question

1 points**When the velocity distribution is uniform over the cross section, the correction factor for the momentum is**CorrectIncorrect - Question 18 of 75
##### 18. Question

1 points**The weight per unit volume of a liquid at a standard temperature and pressure is called**CorrectIncorrect - Question 19 of 75
##### 19. Question

1 points**The losses are more in**CorrectIncorrect - Question 20 of 75
##### 20. Question

1 points**The major loss of energy in long pipes is due to**CorrectIncorrect - Question 21 of 75
##### 21. Question

1 points**When the metacentre of a floating body is lower than the centre of gravity, then the body will be in**CorrectIncorrect - Question 22 of 75
##### 22. Question

1 points**A propped cantilever of span ‘L’ carries a uniformly distributed load of ‘W’ per unit run over its entire span. The value of prop reaction to keep the beam horizontal is**CorrectIncorrect - Question 23 of 75
##### 23. Question

1 points**The maximum value of Poisson’s ratio is**CorrectIncorrect - Question 24 of 75
##### 24. Question

1 points**What is the minimum percentage of main reinforcement in RCC beam for Fe-415 grade steel?**CorrectIncorrect - Question 25 of 75
##### 25. Question

1 points**According to Indian standards the grading of fine aggregates is divided into**CorrectIncorrect - Question 26 of 75
##### 26. Question

1 points**The effective length of 20 m height is taken as**CorrectIncorrect - Question 27 of 75
##### 27. Question

1 points**The basic perfect frame is a**CorrectIncorrect - Question 28 of 75
##### 28. Question

1 points**A RCC beam is tested in the laboratory, the first crack in the bending zone represents**CorrectIncorrect - Question 29 of 75
##### 29. Question

1 points**Modulus of elasticity of M 20 grade concrete is**CorrectIncorrect - Question 30 of 75
##### 30. Question

1 points**A beam of rectangular cross section is 100 mm wide and 200 mm deep. If the section is subjected to a shear force of 20 kN, then the maximum shear stress in the section is**CorrectIncorrect - Question 31 of 75
##### 31. Question

1 points**Steel beam theory is used**CorrectIncorrect - Question 32 of 75
##### 32. Question

1 pointsCorrectIncorrect - Question 33 of 75
##### 33. Question

1 points**Economical depth of plate girder corresponds to**CorrectIncorrect - Question 34 of 75
##### 34. Question

1 points**If the resultant load passes through the shear centre of the built up steel section it will not produce**CorrectIncorrect - Question 35 of 75
##### 35. Question

1 points**The ratio of volume of voids to the total volume of the given soil mass is known as**CorrectIncorrect - Question 36 of 75
##### 36. Question

1 points**Black cotton soil exhibit large swelling and shrinkage due to presence of the following clay minerals:**CorrectIncorrect - Question 37 of 75
##### 37. Question

1 points**The angle of internal friction**CorrectIncorrect - Question 38 of 75
##### 38. Question

1 points**The process in which chlorination is done beyond the break point is called**CorrectIncorrect - Question 39 of 75
##### 39. Question

1 points**For a given discharge, efficiency of sedimentation tank can be increased by**CorrectIncorrect - Question 40 of 75
##### 40. Question

1 points**The most common cause of acidity in water is**CorrectIncorrect - Question 41 of 75
##### 41. Question

1 points**If the diameter of the main pipe is taken less than the economic diameter, then**CorrectIncorrect - Question 42 of 75
##### 42. Question

1 points**The portion of a road surface, which is used by vehicular traffic, is known as**CorrectIncorrect - Question 43 of 75
##### 43. Question

1 points**The side slope of embankment for railway track is taken as**CorrectIncorrect - Question 44 of 75
##### 44. Question

1 points**The highest point on the road surface is called**CorrectIncorrect - Question 45 of 75
##### 45. Question

1 points**Which test is performed for quick determination of subgrade soil?**CorrectIncorrect - Question 46 of 75
##### 46. Question

1 points**The super elevation is**CorrectIncorrect - Question 47 of 75
##### 47. Question

1 points**The performance of a well is measured by its**CorrectIncorrect - Question 48 of 75
##### 48. Question

1 points**A perched aquifer is essentially found within**CorrectIncorrect - Question 49 of 75
##### 49. Question

1 points**Average delta of rice crop is nearly**CorrectIncorrect - Question 50 of 75
##### 50. Question

1 pointsCorrectIncorrect - Question 51 of 75
##### 51. Question

1 pointsCorrectIncorrect - Question 52 of 75
##### 52. Question

1 pointsCorrectIncorrect - Question 53 of 75
##### 53. Question

1 points**The horizontal shear acting on an element induces vertical shear, because of**CorrectIncorrect - Question 54 of 75
##### 54. Question

1 points**If the RL of the bench mark is 100.00 m the back sight is 1.215 m and fore sight is 1.870 m, the RL of the forward station is**CorrectIncorrect - Question 55 of 75
##### 55. Question

1 points**The main plate of a transit is divided into 1080 equal divisions. 60 divisions of the vernier coincide exactly with 59 divisions of the main plate. The transit can read angles accurate up to**CorrectIncorrect - Question 56 of 75
##### 56. Question

1 pointsCorrectIncorrect - Question 57 of 75
##### 57. Question

1 points**Two pipes of same length and diameters d and 2d respectively are connected in series. The diameter of an equivalent pipe of same length is**CorrectIncorrect - Question 58 of 75
##### 58. Question

1 points**If the friction factor of the laminar flow through a circular pipe is 0.1, then the Reynold’s no. of the flow will be**CorrectIncorrect - Question 59 of 75
##### 59. Question

1 pointsCorrectIncorrect - Question 60 of 75
##### 60. Question

1 points**If the deflection at the free end of a uniformly loaded cantilever beam is 15 mm and the slope of the deflection curve at the free end is 0.02 radian, then the length of the beam is**CorrectIncorrect - Question 61 of 75
##### 61. Question

1 points**If the depth of a simply supported beam is doubled and width made half, then the deflection of the beam decreases by a factor**Correct**If the depth of a simply supported beam is doubled and width made half, then the deflection of the beam decreases by a factor**Incorrect - Question 62 of 75
##### 62. Question

1 pointsCorrectIncorrect - Question 63 of 75
##### 63. Question

1 points**Two ISMC 400 channels placed back to back at a spacing of 26 cm carry an axial load of 1600 kN, the lacing system should be designed to resist transverse shear of**CorrectIncorrect - Question 64 of 75
##### 64. Question

1 pointsCorrectIncorrect - Question 65 of 75
##### 65. Question

1 points**When both ends of a column are fixed, the crippling load is P. If one end of the column is made free, the value of crippling load will be changed to**CorrectIncorrect - Question 66 of 75
##### 66. Question

1 points**A cantilever beam fixed at A and free at B is loaded with a point load ‘P’ at B. The first half portion from fixed end is rigid while other half has flexural rigidity EI .Identity the correct combination of deflection at free end B end bending moment at fixed end A respectively**

CorrectIncorrect - Question 67 of 75
##### 67. Question

1 points**A dry soil has a mass of specific gravity 1.35. If the specific gravity of solid is 2.7, then the voids ratio will be**CorrectIncorrect - Question 68 of 75
##### 68. Question

1 pointsCorrectIncorrect - Question 69 of 75
##### 69. Question

1 points**A clay layer of thickness 10 cm and initial void ratio 0.5 undergoes settlement so that the final void ratio is 0.2. The settlement of the layer in cm is**CorrectIncorrect - Question 70 of 75
##### 70. Question

1 points**The population of a town in 3 consecutive years are 5000, 7500 and 8400 respectively. The population of the town in the fourth consecutive year according to geometrical increase method is**CorrectIncorrect - Question 71 of 75
##### 71. Question

1 pointsCorrectIncorrect - Question 72 of 75
##### 72. Question

1 pointsCorrectIncorrect - Question 73 of 75
##### 73. Question

1 points**As per IRC, the minimum length of transition curve for a mountainous terrain road with radius of curvature 100 m and design speed of vehicle 100 kmph is**CorrectIncorrect - Question 74 of 75
##### 74. Question

1 points**The rainfall in four successive 12 hours period on catchment are 4, 8, 9 and 3 cm. If infiltration index for the storm is 0.5 cm/hr, then the total surface runoff will be**CorrectIncorrect - Question 75 of 75
##### 75. Question

1 points**Total capacity of a reservoir is 25 million cubic meters and dead storage is 5 million cubic meters. If average volume of sediments deposition is 0.1 million cubic meter per year, then usefulness of reservoir will start reducing after**CorrectIncorrect

**Similar Pages…**

**Similar Links…… **