Coal India (CIL) Management Trainee (MT) Question Papers on Mining Engineering.
CIL MT Mining Model | Sample | Mock Test Question Paper for 2019-20 Exam, This CIL MT Mining Question are based on the syllabus but here some of the question may out of syllabus, just for your better exam preparation.
This CIL MT Mining Paper will help all the students for their preparation, here the question type is MCQ i.e multiple choice question answers, if this CIL MT Mining question paper in pdf file format you can download it in FREE, if CIL MT Mining paper in text format you can download CIL MT Mining page also just Go to menu bar, Click on File->then Save.
Coal India (CIL) Management Trainee (MT) Question Papers on Mining Engineering.
If you need more CIL MT Mining Sample | Model Paper for 2019-20 or CIL MT Mining Mock Test Paper with or with out solutions for 2019-20 exam, you can request us just post a comment (Check end of this page), For better preparation you can also check CIL MT Mining reference books.
Coal India (CIL) Management Trainee (MT) Question Papers on Mining Engineering
Q1: Run away switch is used in connection with
E. Direct rope Haulage
F. Endless Haulage
G. Gravity Haulage
H. Tail rope Haulage
Correct Answer: A
Q2: Side Discharge Loader is a
A. Crawler mounted machine
B. Tyre mounted machine
C. Both A and B
D. Rail mounted machine
Correct Answer: A
In a surface mine, sound pressure level at a location generated by operation of a dozer and a drill respectively are 80 dBA and 60 dBA, when operated independently. The sound pressure generated by the dozer compared to the drill is higher by a factor of
(A) 10
(B) 20
(C) 100
(D) 200
Answers- A
As per the Indian Electricity Rules 1956, the maximum permissible length of a flexible cable used with an electric rope shovel in m is
(A) 100
(B) 200
(C) 300
(D) 500
Answers- C
The equipment that is NOT used in hard rock metal mining drivage is
(A) road header
(B) drill jumbo
(C) jack hammer
(D) dint header
Answers- D
The roof bolt that follows the principle of point anchorage is
(A) expansion shell bolt
(B) full column grouted bolt
(C) split set bolt
(D) swellex bolt
Answers- A
Equipment used in mining of placer deposits is
(A) auger
(B) wagon drill
(C) rope saw
(D) riffle box
Answers- D
A dump truck powered by 350 kW engine is running at a speed of 35 km/h. Considering the transmission efficiency of the truck as 85%, the rim pull of the truck in kN is
(A) 21
(B) 31
(C) 41
(D) 51
Answers- B
Nystagmus is a miner’s disease associated with
(A) lever
(B) lung
(C) eye
(D) stomach
Answers- C
Apart from mining of coal, the longwall mining method has been practiced for mining the deposits of
(A) copper
(B) lead and zinc
(C) manganese
(D) pyrite and phosphate
Answers- D
The three segments, whose synchronous functioning is essential for GPS operations, are
(A) space, control and user
(B) signal, control and user
(C) space, control and geo-registration
(D) signal, control and geo-registration
Answers- A
When a double ended ranging drum shearer cuts coal in a longwall face,
(A) both the drums rotate in the same direction keeping the front drum up and the rear drum down
(B) both the drums rotate in the opposite direction keeping the front drum up and the rear drum down
(C) both the drums rotate in the opposite direction keeping the front drum down and the rear drum up
(D) both the drums rotate in the same direction keeping the front drum down and the rear drum up
Answers- B
Continuous miner and shuttle car combination is NOT applicable in mining with
(A) rib pillar extraction technique
(B) Wangawilli system
(C) room and pillar method
(D) longwall method
Answers- D
Contours in a topographic map
(A) are not closed upon themselves although the earth is a continuous surface
(B) are not perpendicular to the direction of maximum slope
(C) provide an indication of presence of valley or ridge in the area
(D) are the lines joining the points of same declination at different elevations
Answers- C
A Dragger Gas Mask DOES NOT filter
(A) water vapour
(B) nitrous fumes
(C) carbon monoxide
(D) carbon dioxide
Answers- B
A system consists of four elements A, B, C and D which are connected functionally in a parallel configuration. The individual reliability of the elements is 0.80, 0.82, 0.85 and 0.90 respectively. The reliability of the system is
(A) 0.498
(B) 0.602
(C) 0.750
(D) 0.999
Answers- D
The blasting technique used for controlled throw of overburden is known as
(A) cast blasting
(B) coyote blasting
(C) plaster shooting
(D) pop shooting
Answers- A
The stoping method, where a large part of blasted ore is allowed to accumulate in the stope to serve the purpose of providing working platform for stoping as well as to support the wall-rock, is known as
(A) shrinkage stoping
(B) cut and fill stoping
(C) square-set stoping
(D) sublevel stoping
Answers- A
CIL Coal India Limited MT Management Trainee Question Paper And Materials for All Posts
See Also……